What is the difference between remington 870 express and tactical

The Police is a Wingmaster with a dull finish and is a much more carefully inspected and built gun. The new "Tactical" and Marine Magnum guns are based on the Express. How Remington lowered the Express price was to reduce hand labor to a bare minimum, and to eliminate much of the polishing and de-burring the better quality Wingmaster and Police guns get.

The Express is basically the same forged and milled steel receiver and heavy-duty internals gun the better 's are, just in a rougher, less well finished form with plastic and MIM parts. The Express Model has: A plastic trigger group. A rougher finish inside and outside, with machine marks and some burrs left.

A rougher, bead blasted blue job. A less polished bore. A two piece sleeved barrel. The Defense version has 18", Cylinder bore barrel, with a bead sight. The Marine Magnum and Tactical models have plated or polymer finishes.

The Wingmaster has: An aluminum trigger group. The old style magazine retention system. A much smoother finish inside and out, no machine marks or burrs. The Wingmaster gun receives a higher level of inspection and finishing.

A fine, commercial polished blue finish. A polished bore. A chrome plated bolt. A one piece barrel. Walnut stocks with the famous "Bowling Pin" finish in gloss or satin. Wide choices in barrel lengths and choke options. No use of MIM parts, the extractor is milled. The Wingmaster is the full top-of-the-line commercial Remington pump gun, and is priced accordingly. The Police has: An aluminum trigger group. A military-grade parkerized finish. Walnut or synthetic stock, with a short police-length fore end.

Choices in different stocks, including Speed-feed, and others. Police options like magazine extenders, forearms with built-in lights, and sling swivels. To sum up these weapons, the Remington Express is an affordable shotgun, the Remington Wingmaster is a great sporting gun for hunting, and the Remington Police is perfect for self-defense purposes.

No matter which one you choose, you are guaranteed to have a high-quality shotgun. On a side note, here are some extra things you need to watch out for when using these weapons. Perhaps this information will help you decide which weapon you want to use.

There are rumors that Express, for example, is not as well de-burred on the outside or inside. If you were to run your fingers through its interior, you could find sharp edges sometimes. The Police and Wingmaster, however, have smooth burrs because they are processed through a vibratory deburring tank. That is why more machine marks can be found on the Express shotgun and why it is a little bit rougher on the inside.

On the upside, the Express should eventually get smoother as you continue to use it regularly. As for the outside of the Police and Wingmaster shotguns, the polish used on them helped remove most of the machine marks before its finishing was applied.

The finish on the Express still reveals its machine marks, though. All three models have some similarities. They all contain the same receiver that was forged and milled. All their internal components are heavy-duty material to ensure their long lifespan.

This is a lifespan that lasts for about , rounds on each of the three models. But if you have a shotgun with an aluminum frame, the lifespan will likely be about 70, rounds instead. Remington Wingmaster Stock and Forend for Sale. Had already decided on Express, but after seeing the new Wingmaster — it just won me over.

So, here is my brand new at the moment fired 0 times Wingmaster 12 gauge magnum. Going to take it apart later, clean it up and then spend some time tomorrow at the range. Looks lovely and I was surprised it actually came with a Limbsaver recoil pad from factory. Also, I noticed the bolt face had some red markings on it which I cleaned up, guessing from some testing at the factory.

Model WingMaster Order No. Best Upgrades for Remington The main difference between the express and the wingmaster is the working parts. All the working parts in the wingmaster are machined, while all the working parts in the express are stamped.

The wingmaster has a much smoother action than the express because of this. Less hand labor goes into making the express since all the working parts are stamped, which is the main reason for the higher price tag of a wingmaster. Not only are the Express parts stamped, but the trigger assembly is plastic, compared to the machines steel of the Wingmaster! Big difference!!! Pretty sure thats not accurate. I know both receivers are milled.

Orher than the extractior being cast instead of milled, and perhaps more polishing on the Wingmaster, my understanding is that funtionally and in the fabricating of parts they are the same. This is completely untrue. The extractor is mim stamped but the other internals are the same. The trigger housing is metal vs. Plastic, and theres a bit less polishing done overall. Add to that the different exterior finish and you have wingmaster vs. Its dangerous to give out bad info.

MIM is metal injection molded. It is powder metal injection like plastic injection molding, except usingmetal paste, the paste is injected into a mold then processed at high temperature to burn off binders and sinter the piece. There can be variation of this process.

MIM is not stamped. Hitting the part after sintering, called forging is not the stamped process either. This article was written to help you to choose the best one which suits your needs the most. All Remington shotguns are based on one platform. Whether you buy the budget Express or the more expensive Police, they all use the same platform.

You can buy and upgrade those parts yourself if you want. One of the biggest advantages of the is its steel receiver. It is made from a solid block of steel, which is what makes the Remington so strong and reliable. This is the only shotgun in the world that is made of steel. I have put over 40, rounds into two s, and they still work perfectly. I only had small problems, such as a broken firing pin spring. Another advantage of the most popular pump-action shotgun in the world are all the aftermarket accessories and upgrades available for it.

They are available from many manufacturers, and each year, we see new ones being introduced to the market. All Remington versions are built on one platform and receiver made of a solid block of steel. This is the heart of the platform. But still, there are many small differences you need to know about. Some of them are just cosmetic, but some of them are more important. Remington Tactical with one-piece magazine tube.

There is the Tactical version with a one-piece magazine tube. This eliminates the joint between the magazine and magazine tube extension.

This was done to add more reliability to the shotgun. The joint is a weak point where the spring or follower may get stuck. This is especially true with a standard magazine follower. Aftermarket magazine followers are more reliable than the factory ones. That is why the barrel nut on some of the Tactical versions are in a different location, so you will need a spacer F for the Remington Tactical shotgun one-piece magazine tube if you want to install the barrel from one of the common versions.

Some of the more expensive versions have magazine cap detent. It prevents magazine cap or magazine extension from loosening. A magazine cap detent is available on Tactical and Police versions of the Remington It is more reliable to have magazine cap detent, especially if you shoot a lot.

It is even possible to add a magazine cap detent to your yourself. Basic Remington shotguns, which come without the magazine tube, usually have two dimples at the end of the magazine tube.

They are needed to hold the new style spring retainer in place. But they also prevent the owner from installing the magazine tube. You will need to remove the dimples before installing the magazine tube extension. Most of the versions come with a Metal Injection Molded extractor. This is the modern process of parts manufacturing, and it is suitable for many purposes. But the hardness of the non-MIM extractor is higher, which leads to a more reliable extraction of the fired shotshells.

This is especially important for reloaded or low-quality cheap ammunition. You can always replace the factory Remington extractor with a non-MIM extractor. It takes several minutes, and you are good to go. It is patented and made of a special material which reduces felt recoil. It really works and makes the life of a shotgun shooter so much easier. But you can always buy and install it later.

The sights on a Remington can be different too. Some shotguns come with simple bead sights on the end of the barrel. Other shotguns have fancy XS rear and front sights installed.

There are s with simple rifle sights installed: Deer, some of the Police versions, fully rifled barrels. Choose the one you like more. Rifle sights have an advantage; they can be easily replaced with aftermarket sights. Also, the Tactical version gives you the advantage of having the rail to mount the red dot sight.

You can find rifle sights on many s. They are easy to use, and many shooters like them because they give the shooter better accuracy. Also, factory rifle sights are easy to upgrade. You just need to push out the front sight and unscrew the rear sight. There are many versions of aftermarket rifle sights available for the Remington You will find ghost ring sights, light-gathering sights, etc. The rear sight is adjustable for windage and elevation. Zeroing is simple; you will need only basic tools for that.

Remember to use some Loctite to secure the rear sight after zeroing. Heavy shotgun recoil may loosen the screws. XS Sights is a well-known manufacturer of different sights for firearms. Remington partnered with XS Sights to offer the Tactical version with ghost ring sights.

They enable the shooter to aim fast, especially when shooting slugs. A very good addition to a tactical shotgun. Of course, you can buy them later, but they are pretty expensive and you will also need the help of a gunsmith for installation. Good old bead sight! The simplest and the cheapest front sight possible but it serves its purpose. It is installed on many versions, and it is enough for a beginner. You may replace it with a light-gathering sight later.

Bolt has special port cover:. Trigger group is a little different too:. If the stock is too long or too short, it will not be comfortable to shoot the shotgun. There are lots of other things to consider too, such as the material, pistol grip or classic stock, and recoil-reducing or regular. There are many stocks available to choose, everything from classic hardwood to recoil-reducing Knoxx stock. Two of the most popular choices are hardwood or synthetic furniture sets made by Remington.

They are simple and nice, and most of the shooters are happy with them. But if you want to replace them, then you can choose one of the many aftermarket stocks for the Remington Which factory stock is better? Hardwood or synthetic? The hardwood stock is classic and looks awesome, but it is easier to scratch or damage it.

The synthetic stock can withstand even rough handling. Also, wood stock feels warmer during cold weather. Choose the set you like more. Anyway, you can easily change them later. You can also choose the pistol grip which is available on some of the tactical versions of the Remington It makes it easier to use the shotgun for shooters who have experience with rifles.

Also, it gives you some advantages when shooting from difficult positions. The disadvantage of the pistol grip is that some of the recoil will hit your wrist.

I know how emotional that moment is when you are in a gun shop to buy the long-awaited Remington shotgun. But first, please read the following pieces of advice to make sure this purchase is pleasant and problem free. The best advice I can give you is to find somebody who is familiar with the Remington and ask them to go with you to a gun shop. That way, you can be sure that they will inspect the gun and will be able to see if something is wrong with it.

Gun enthusiasts are usually very friendly and ready to help somebody who is willing to buy a firearm. Check all metal surfaces for rust or scratches.

The Remington Express easily rusts and you must inspect the shotgun thoroughly. Disassemble the shotgun to check the internal surfaces too. Also, check the wooden or plastic parts.

Check the stock and forend for cracks and splits. This is especially important when you are buying a used shotgun. Look into the barrel to see if it has any defects. The barrel itself must be straight and without bulges or dents. And of course, it must be clean so that you can actually see if it looks good or not. Remove the barrel before looking into it, safety first!